How To Reset Chevy Equinox Radio

The Chevy Equinox is a crossover SUV that was first introduced in 2005. The Equinox has been through several revisions, the most recent of which was in 2010. One common issue with the Equinox is that the radio can become unresponsive or reset. There are a few ways to reset the Chevy Equinox Radio.

How To Reset Chevy Equinox Radio

To reset the Chevy Equinox radio, first turn off the ignition. Next, press and hold the power button for about five seconds. Then release the button and press it again. After the radio turns on, release the power button.

– Flathead screwdriver – Phillips screwdriver – Small wire brush – Isopropyl alcohol – Paper towel

  • Turn off the car
  • Pull the fuse out and wait 5 seconds replace the fuse and turn on the car
  • Find the fuse labeled “radio”
  • Locate and open the glove box

-If your Chevy Equinox radio is not working, resetting it may fix the issue. -To reset the Chevy Equinox radio, you will need to use the buttons on the radio itself. -There are three buttons that you will need to use: the power button, the mode button, and the tuning knob. -First, press and hold the power button for five seconds until the radio turns off. -Next, press and hold the mode button

Frequently Asked Questions

How Do You Reset Equinox Radio?

There is not one specific way to reset an Equinox radio. However, some methods that may work include turning the car off and on again, pressing and holding the power button, or disconnecting the battery.

How Do You Reset The 2013 Chevy Equinox?

There is no one-size-fits-all answer to this question, as the method for resetting a 2013 Chevy Equinox may vary depending on the individual vehicle’s make and model. However, some tips on how to reset a Chevy Equinox include checking the owner’s manual, contacting a dealership, or searching online for specific instructions.

How Do I Reset My Chevy Sound System?

There are a few ways to reset a Chevy sound system, but the most common is to use the car’s manual. Many manuals will have a specific section on the sound system with instructions on how to reset it. If your car doesn’t have a manual, or you can’t find the section on the sound system, there are other ways to reset the system. One way is to use the stereo’s reset button. This button is usually located on the front or side of the stereo. Another way to reset the system is to disconnect the battery.

Why Is My Chevrolet Radio Not Working?

There are a few things that could be causing your Chevrolet radio not to work. One possibility is that the fuse has blown. Another possibility is that the wiring in your car is damaged, which would need to be fixed before the radio would work again.

Why Is My Radio Not Working In My Chevy Silverado?

There are a few reasons why your radio may not be working in your Chevy Silverado. One reason may be that the fuse has blown, so it’s worth checking to see if the fuse is blown and replacing it if necessary. Another possibility is that the antenna is not plugged in or is damaged, so make sure the antenna is plugged in properly and is not damaged. Finally, the radio itself may be defective, so you may need to have it replaced.

How Do You Reset The Radio On A 2018 Chevy Equinox?

To reset the radio on a 2018 Chevy Equinox, press and hold the power button until the radio turns off.

How Do You Reset The Radio On A 2010 Chevy Equinox?

1) Open the driver’s side door. 2) Locate the “Radio” knob on the center console and rotate it all the way to the left. 3) Push in and hold the “Radio” knob. 4) While holding the “Radio” knob, turn the key in the ignition to the “On” position (not necessarily all the way to “Start”). 5) Keep holding the “Radio” knob until you hear a beep. 6) Release the “Radio” knob and wait for the radio to reset.


To reset the Chevrolet Equinox radio, press and hold the power button for 10 seconds.

Leave a Reply

Your email address will not be published. Required fields are marked *